热门关键词：亚搏手机app官方网站入口 | 济南复合板 | 亚搏手机app官方网站入口 | 济南c型钢 | 济南钢结构 |
Color steel plate products are widely used and have high requirements for the quality of products. Therefore, high-quality base materials must be selected for the plates required for construction to ensure the firmness of the products. We should choose reliable manufacturers and not be greedy. Here are the basic precautions for the use of Jinan color steel plate.
After the color steel plate is transported to the site, the product certificate and relevant certificates shall be issued and the inspection application procedures shall be completed. The surface of the color steel plate shall not be scratched, and its geometric dimension shall meet the requirements of the design drawings. If there are scratches, the Contractor shall conduct technical treatment after the protective film is removed.
During installation, the plastic protective film on the surface of the wall panel shall not be removed, and it is prohibited to impact and step on the pedal surface. The specification, performance and integrity of accessories and various materials shall be strictly checked. Unqualified or damaged accessories are strictly prohibited.
All installation gaps in the clean area shall be sealed with silica gel. Before gluing, the installation gaps must be strictly cleaned to remove impurities and oil stains, ensure that the paste is dense and prevent falling off and dust accumulation. The surface of silica gel shall be smooth without wrinkle.
Erect the color steel plate wallboard in a fine manner, and install the prefabricated components according to the layout drawing. Fix the adjacent wallboards with fixed inserts between the components. It is worth noting that the concealed electrical pipelines and boxes shall be well coordinated while the wall panels are assembled. The wallboard shall be vertical and the vertical joints shall be tight. The smaller the gap, the more beautiful it is. The vertical joints shall be uniform. During operation, the protective film on the vertical seam shall be carefully cleaned and temporarily removed, but never removed. Clean the sundries in the tank and the solidified hard blocks of the adhesive liquid.
During the installation process, strict inspection and site investigation shall be conducted for each item to confirm that the strength and stability of the product meet the construction requirements, ensure the structural safety of the equipment, and have wind resistance, seismic resistance and certain bearing capacity. Follow us Yes, learn more!